RL-PIN40 Dim 827/C/GY6,35 CFL

Referentie
19831
Swipen voor 1 additionele foto
€ 10,00 € 8,28 € 0,10
15 in voorraad
Details
  • Vermogen 4,5W
  • 470lm
  • 2700K - Warm Wit
Meer informatie
Meer informatie
Referentie 19831
EAN code 4008597198311
Data sheet 19831.pdf
Kleur Warm Wit
Zolang de voorraad strekt Nee
Socket GY6.35
Spanning 12V
Technologie LED
Toepassing Dimbaar
Vermogen 4,5W
Technische specificaties

General Data

43719831
RL-PIN40 DIM 827/C/GY6.35
4008597198311
85395200

Electric Parameters

4.5 W
4.5 W
5 kWh
> 0.9
11.5-12 V
AC
370-370 mA
370 mA
4,2 A
46
58
Yes

Light Application Parameters

470 lm
470 lm
320 °
104 lm/W
warmwhite
2700 K
0.458
0.410
≥ 80
80
≤ 6 sdcm

Service Life

20000 h
20000 h
100000
≥ 0.90
≤ 5.0 %
4 years

Specification

current label, with EPREL registration
F
18 mm
50 mm
50 mm
any
0.0 mg
RG1
GY6.35
White

Notes on Operation

IP20
any
-20 … +40 °C

Information especially for EPREL

current label, with EPREL registration
LED
No
6
0.90
0.70
1.0
0.4

Notes

Spectrum

As daylight is a mixture of direct sunlight and light from the sky, the spectral distribution changes all the time due to the time of the day and the weather. The standard illuminant D65 corresponds to daylight with colour temperature of about 6500K.
The colour of coloured LEDs depends on the chemical elements within the light generating chip. The coloured light is generated directly and does not need filtering.
White LEDs are either RGB (red + green + blue chip in one LED = light colour white) or blue LED-chips with yellow/orange phosphor in the resin.
Visible region from 380 to 780 nm; height of graph corresponding with relative spectral emission (400mW/klm)per 10nm.

Spektrum 2daylight(D 65)

Special features

PictoPictoPicto

General notes

For LED replacement of halogen and incandescent lamps, we recommend direct replacement (1: 1) at the respective burning position. For new systems, the number of lamps in the circuit operated at control gear such as transformers or dimmers can be obtained from corresponding compatibility lists (if available). If there is no specification for the type of device or lamp required, for safety reasons, the replacement power shall be assumed as taht of the original halogen type (eg "RL-MR16 35" -> 35W, independent of the real power consumption).

The technical design data in accordance with DIN and IEC. The producer does not take any responsibility for damage to persons or property in case of unsuitable operation or handling of the product. Operating data and dimensions are valid within the usual tolerances. Related lamp types (different bases, mains voltages) may be available on request. Sale and delivery are effected in accordance with the Radium Terms of Delivery and Payment valid on the day of conclusion of contract. Packing units offer economical advantages to the purchase and logistic department. Please match your quantity volume accordingly. For orders of a minimum quantity (clefts) with a lamp model the amount lower than the volume of each packaging unit, we will invoice 10 % additional charge per lamp type. Technical changes and terms of delivery are reserved. Manipulation of any kind to packaging or product is not permissible as this will violate Radium brand rights. Furthermore, technical properties of the product can change to its disadvantage or even destruction. Therefore, Radium cannot be responsible for consequential damages.
® = Registered trademark
Subject to change without notice. Errors and omissions excepted.

Safety instructions

To ensure full light efficiency and product life, the permissible temperature ranges must be observed and dry environment ensured. When operated with existing control gear, their compatibility with the lamp must be checked.

* Ondanks een zeer uitgebreid voorraadsysteem, is het mogelijk dat de voorraadstatus niet overeenstemt met de actuele voorraad. Aarzel niet ons te contacteren, indien u zekerheid wenst over de beschikbaarheid. 

** De weergegeven foto bij de producten kan verschillen van het eigenlijke product.