Capteur de vitesse pour Arduino
- 2 sorties: 1 x numérique, 1 x analogique
- LED d'alimentation
- LED pour impulsions à D0
- tension de service: de 3.3 à 5 VCC
- largeur de rainure: 5 mm
- poids: 8 g
- dimensions: 32 x 14 x 7 mm (1.26 x 0.55 x 0,27")
Référence | VMA347 |
---|---|
code EAN | 5410329717629 |
Marque | VELLEMAN |
Jusqu'à épuisement du stock | No |
The sensor is very easy to operate: To measure the speed of a motor, make sure the motor has a disk with holes. Each hole should be equally spaced on the disk. Every time the sensor sees a hole, it creates a digital pulse on the D0 pin. This pulse goes from 0V to 5V and is a digital TTL signal. If you capture this pulse on a development board and calculate the time between the two pulses, you can determine the revolutions speed: (time between pulses X 60)/number of holes.
For example, if you have one hole in the disk and the time between two pulses is 3 seconds, you have a revolutions speed of 3*60 = 180 rpm. If you have 2 holes in the disk, you have a revolutions speed of (3*60/2) = 90 rpm.
Features
- 4 pin connector: analog out, digital out, ground, vcc
- LED power indicator
- LED indicator of the output pulses at D0
Specifications
- working voltage: 3.3 to 5 VDC
- groove width: 5 mm
- weight: 8 g
- dimensions: 32 x 14 x 7 mm (1.26 x 0.55 x 0,27")
* Malgré un système de stock très étendu, il est possible que le stock ne correspond pas au stock actuel. Si vous voulez vérifiez le stock, n'hésitez pas de nous contacter.
** * La photo affichée peut différer du produit réel.