Fluke 113 Multimeter

Reference
FLUKE-113EUR
Swipen voor 2 additionele foto's
€210.54 €174.00
3 in stock
Details

The 113 is for basic electrical tests and repairing most electrical problems. Features include Fluke’s VCHEK™, added measurement functions, backlight and conformance to the latest safety standards.

More Information
More Information
Reference FLUKE-113EUR
EAN code 02090185064575
Manufacturer FLUKE
Brand FLUKE
Data sheet FLUKE-113.pdf
Technical sheet FLUKE-110-series.pdf
While stocks last No
Technical specifications

True RMS Multimeter for electronic basic measurements

True RMS Multimeter for electronic basic measurements

Fluke 113

The Fluke 113 is specifically designed for electrical basic measurements and troubleshooting most electrical problems. With this multimeter, you can perform accurate measurements and quickly and efficiently identify issues.

Features:

  • VCHEK™ function: The VCHEK™ function allows you to quickly and easily check circuit voltages.
  • Additional measurement functions: In addition to the standard measurement functions, the Fluke 113 also offers capabilities for measuring diodes, continuity testing, Ohm measurement, and capacitance measurement.
  • Backlight: The built-in backlight allows you to use the multimeter in dark environments.

Safety:

The Fluke 113 complies with the latest safety standards, allowing you to work with peace of mind. The instrument is designed with your safety as a priority.

Specifications: Fluke 113 Digital Multimeter

Specifications
VCHEK1 2 3 Range 6.000 V / 60.00 V / 600.0 V
Resolution 0.001 V / 0.01 V/ 0.1 V
Accuracy DC, 45 to 500 Hz: 2.0% + 3
500 Hz to 1 kHz: 4.0% + 3
Diode test4 Range 2.000 V
Resolution 0.001 V
Accuracy 2.0% + 3
Continuity4 Accuracy Beeper on < 20 Ω, off > 250 Ω detects opens or shorts of 500 μs or longer
Ω4 Range 600.0 Ω / 6.000 kΩ / 60.00 kΩ
Resolution 0.1 Ω / 0.001 kΩ / 0.01 kΩ
Accuracy 0.9% + 2 / 0.9% + 1 / 0.9% + 1
Capacitance4 Range 1000 nF / 10.00 μF / 100.0 μF / 9999 μF
Resolution 1 nF / 0.01 μF / 0.1 μF / 1 μF
Accuracy 1.9% + 2
100 μF - 1000 μF: 1.9% + 2
1000 μF: 5% + 20
1. All VChek voltage ranges are specified from 60 counts to 100% of range. Because inputs below 60 counts are not specified, it is possible and normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together.
2. Crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale.
3. Minimum measureable input in VCHEK autorange is 3 VDC. For measurements below 3 VDC, push Range button twice to get to 6 VDC manual range.
4. After measuring voltage, a wait time of 1 minute is required to maintain accuracy of ohms, capacitance, diode test, and continuity.
Specifications
Maximum voltage between any terminal and earth ground 600 V
Display 3 3/4-digits, 6000 counts, updates 4/sec
Operating temperature -10°C to 50°C (14°F to 122°F)
Storage temperature -40°C to 60°C (-22°F to 140°F)
Temperature coefficient 0.1 x (specified accuracy) / °C (< 18°C or > 28°C)
Operating altitude 2,000 m
Storage altitude 10,000 m
Relative humidity 95% to 30°C
75% to 40°C
45% to 50°C
Battery type 9 Volt Alkaline, IEC 6F22
Battery life Alkaline: 300 hours typical, without backlight
Size (H x W x L) 167.1 x 85.1 x 46.0 mm (6.58 x 3.35 x 1.81 in)
Weight 13.0 oz (404 g)
Safety IEC 61010-1: Pollution Degree 2
IEC 61010-2-033: CAT IV 600V
EMI regulations Complies with FCC Part 15, Class B
Specifications
VCHEK Input impedance (nominal) ~3 kΩ < 300 pF
VCHEK Common mode rejection ratio
(1 kΩ unbalanced)
> 60 dB at DC, 50 or 60 Hz
Ω Open circuit test voltage < 2.7 VDC
Full scale voltage < 0.7 VDC
Diode test Open circuit test voltage 2.7 VDC
Full scale voltage 2.000 VDC
Ω Short circuit current < 350 μA
Diode test Short circuit current < 1.0 mA
We found other products you might like!

* Ondanks een zeer uitgebreid stocksysteem, is het mogelijk dat de voorraadstatus niet overeenstemt met de actuele voorraad. Aarzel niet ons te contacteren, indien u zekerheid wenst over de beschikbaarheid.

** De weergegeven foto bij de producten kan verschillen van het eigenlijke product.